| STANDARD ACCESSORIES |
| Injection |
| 1 | Multistage injection speed control: 10 speeds / Filling pressures for each speed stage |
| 2 | Multistage injection pressure control: 10 pressures / Holding speeds for each pressure stage |
| 3 | Multistage screw recovery control: 3 speeds, 3 back pressures |
| 4 | Nozzle temperature group control |
| 5 | Cold screw starting prevention |
| 6 | Barrel heater cover |
| 7 | Automatic purge |
| 8 | Hopper base temperature control |
| 9 | Back pressure delete in manual mode |
| 10 | Purge guard |
| Clamping |
| 11 | Multistage mold open/close speed control: 6 speeds |
| 12 | Automatic mold height/clamping force adjustment |
| 13 | Low pressure mold protection |
| 14 | Ejector advance position holding function |
| 15 | Mold set mode with low speed/low pressure |
| 16 | Mechanical mold closing safety device |
| 17 | Robot mounting holes |
| Control |
| 18 | 12.1 inch color LCD touch panel |
| 19 | Ejector on the fly |
| 20 | Delay timers for injection, screw recovery, nozzle and ejector |
| 21 | Expert function (Initial condition setting/Setting conversion from other machines) |
| 22 | Barrel follow-up temperature control for nozzle zone |
| 23 | Calender timer for heater startup |
| 24 | Multiple language (English, Japanese, Chinese, Spanish) |
| 25 | Mold memory storage/reset (32 set-ups) |
| 26 | Mold trial set-up memory (10 set-ups) |
| 27 | Graphic monitor for injection speed and pressure |
| 28 | Hour meter for maintenance |
| 29 | Servo motor monitor |
| 30 | 100-shot monitor |
| 31 | Records for parameter input, alarm and rejection product |
| 32 | Monitoring data statistic processing |
| 33 | Physical value setting (Speed, resin pressure, screw speed) |
| 34 | Select switch for machine shut down alarm |
| 35 | Alarm buzzer |
| 36 | Printer interface |
| Alarms |
| 37 | Automatic lubrication abnormal alarm |
| 38 | Servomotor abnormal alarm |
| 39 | Motor thermal abnormal alarm (Carriage motor, mold height adjustment motor) |
| 40 | V-P transfer alarm (Time, position, pressure) |
| 41 | Screw recovery time alarm |
| 42 | Cycle time alarm |
| 43 | Barrel temperature alarm |
| 44 | Hopper base temperature alarm |
| 45 | Heater break alarm |
| 46 | SSR abnormal alarm |
| 47 | Thermocouple break alarm |
| 48 | Temperature regulator preparation alarm |
| 49 | Resin lack alarm |
| 50 | Clamp alarm |
| Counters |
| 51 | Production shot counter (preset type) |
| 52 | Preparation shot counter (preset type) |
| 53 | Reject shot counter (preset type) |
| 54 | Reject continuous shot counter (preset counter) |
| 55 | Shot counter for external conveyor |
| 56 | Injection monitor at flexible screw position |
| Others |
| 57 | Auto Lubrication |
| 58 | Spare grease cartridge |
| 59 | Emergency stop button with lock |
| 60 | Leveling pads |
| 61 | Special tools |
| OPTIONAL ACCESSORIES |
| 1 | Recovery on the fly |
| 2 | External floppy disk drive memory |
| 3 | Printer |
| 4 | Ejector compression system (ECS) |
| 5 | Small size screw complete |
| 6 | Anti-wearing screw and barrel |
| 7 | High temperature molding speciality |
| 8 | Optional nozzle (long open/needle) |
| 9 | Ejector plate return confirmation |
| 10 | Special locating ring |
| 11 | Heat insulating board (thickness: 5mm) |
| 12 | Interface for product drop detector |
| 13 | Quality discriminate detector |
| 14 | Warning light |
| 15 | Outlet |
| 16 | Interface for hot runner |
| 17 | Interface for unscrewing device (motor excluded) |
| 18 | Mold temperature regulator (electric heater) |
| 19 | Earth leakage breaker |
