| ITEM |
UNIT |
| CLAMPING UNIT |
CLAMPING SYSTEM |
_ |
| CLAMPING FORCE |
kN (USt) |
| LOCATION HOLE DIAMETER |
(inch) |
| TIE-BAR DISTANCE |
mm (inch) |
| PLATEN SIZE |
mm (inch) |
| MAX. MOLD OPEN STROKE |
mm (inch) |
| MOLD HEIGHT: min / max |
mm (inch) |
| DAYLIGHT |
mm (inch) |
| EJECTOR STROKE |
mm (inch) |
| EJECTOR FORCE |
kN(Ust) |
| INJECTION UNIT |
INJECTION UNIT |
T • m |
| SCREW TYPE |
_ |
| SCREW DIAMETER |
mm (inch) |
| SCREW STROKE |
mm (inch) |
| THEORETICAL SHOT VOLUME |
cm3 (cu.in) |
| SHOT MASS |
g (oz) |
| MAX. INJECTION PRESSURE |
(PSI) |
| MAX. HOLDING PRESSURE |
(PSI) |
| MAX. INJECTION SPEED |
mm/s (inch/s) |
| INJECTION RATE |
cm3/s (cu.in/s) |
| SCREW SPEED |
min-1 |
| PLASTICIZING CAPACITY |
kg/h (oz/s) |
| NOZZLE STROKE |
mm (inch) |
| NOZZLE TOUCH FORCE |
tons |
| AUTO TEMP CONTROL ZONE |
_ |
| HEATING CAPACITY |
kW |
| OTHERS |
MACHINE kVA |
kVA |
| MACHINE MASS |
t (USt) |
| MACHINE SIZE |
L |
m (inch) |
| W |
m (inch) |
| H |
m (inch) |
| HOPPER CAPACITY |
L (gal.) |
|
| MD1100S-IV |
| DOUBLE TOGGLE |
| 9800 (1102) |
| (5) |
| 1270 x 1270 (50.0 x 50.0) |
| 1820 x 1820 (71.65 x 71.65) |
| 1400 (55.12) |
| 500 / 1240 (19.69 / 48.82) |
| 2640 (103.94) |
| 200 (7.87) |
| 245 (27.54) |
| i 74 |
| A |
B |
| 100 (3.94) |
112 (4.41) |
| 500 (19.69) |
| 3927 (239.64) |
4926 (300.60) |
| 3613(127.44) |
4532 (159.86) |
| 185 (26830) |
150 (21760) |
| 170 (24660) |
135 (19580) |
| 150 (5.91) |
| 1178 (71.89) |
1478 (90.19) |
| 120 |
| 430 (4.21) |
450 (4.41) |
| 730 (28.74) |
| 4.4 |
| 1G + 5 |
| 51.25 |
| 240 |
| 61 (67.1) |
| 12.3 (482.4) |
| 2.7 (107.2) |
| 2.5 (98.0) |
| 120 (31.70) |
|
