| ITEM |
UNIT |
| CLAMPING UNIT |
CLAMPING SYSTEM |
_ |
| CLAMPING FORCE |
kN (USt) |
| LOCATION HOLE DIAMETER |
(inch) |
| TIE-BAR DISTANCE |
mm (inch) |
| PLATEN SIZE |
mm (inch) |
| MAX. MOLD OPEN STROKE |
mm (inch) |
| MOLD HEIGHT: min / max |
mm (inch) |
| DAYLIGHT |
mm (inch) |
| EJECTOR STROKE |
mm (inch) |
| EJECTOR FORCE |
kN(Ust) |
| INJECTION UNIT |
INJECTION UNIT |
T • m |
| SCREW TYPE |
_ |
| SCREW DIAMETER |
mm (inch) |
| SCREW STROKE |
mm (inch) |
| THEORETICAL SHOT VOLUME |
cm3 (cu.in) |
| SHOT MASS |
g (oz) |
| MAX. INJECTION PRESSURE |
(PSI) |
| MAX. HOLDING PRESSURE |
(PSI) |
| MAX. INJECTION SPEED |
mm/s (inch/s) |
| INJECTION RATE |
cm3/s (cu.in/s) |
| SCREW SPEED |
min-1 |
| PLASTICIZING CAPACITY |
kg/h (oz/s) |
| NOZZLE STROKE |
mm (inch) |
| NOZZLE TOUCH FORCE |
tons |
| AUTO TEMP CONTROL ZONE |
_ |
| HEATING CAPACITY |
kW |
| OTHERS |
MACHINE kVA |
kVA |
| MACHINE MASS |
t (USt) |
| MACHINE SIZE |
L |
m (inch) |
| W |
m (inch) |
| H |
m (inch) |
| HOPPER CAPACITY |
L (gal.) |
|
| MD1550S-IV |
| DOUBLE TOGGLE |
| 13700 (1550) |
| (5) |
| 1830 x 1510 (72.0 x 59.5) |
| 2480 x 1970 (97.6 x 77.55) |
| 1500 (59) |
| 650 / 1300 (25.59 / 51.18) |
| 2800 (110.23) |
| 250 (9.84) |
| 323 (36.2) |
| i 154 |
| A |
B |
| 120 (4.72) |
132 (5.2) |
| 720 (28.34) |
| 8143 (496.91) |
9853 (601.26) |
| 7491 (264.23) |
9065 (319.75) |
| 185 (26830) |
150 (21760) |
| 170 (24660) |
135 (19580) |
| 125 (4.92) |
| 1413 (94.62) |
1710 (104.34) |
| 110 |
| 600 (4.21) |
580 (4.41) |
| 880 (34.65) |
| 6.6 |
| 7 |
| 56 |
60 |
| 272 |
| 104 (114.4) |
| 15 (592.0) |
| 3.8 (150.7) |
| 3.1 (122.1) |
| |
|
