| ITEM |
UNIT |
| CLAMPING UNIT |
CLAMPING SYSTEM |
_ |
| CLAMPING FORCE |
kN (USt) |
| LOCATION HOLE DIAMETER |
(inch) |
| TIE-BAR DISTANCE |
mm (inch) |
| PLATEN SIZE |
mm (inch) |
| MAX. MOLD OPEN STROKE |
mm (inch) |
| MOLD HEIGHT: min / max |
mm (inch) |
| DAYLIGHT |
mm (inch) |
| EJECTOR STROKE |
mm (inch) |
| EJECTOR FORCE |
kN(Ust) |
| INJECTION UNIT |
INJECTION UNIT |
T • m |
| SCREW TYPE |
_ |
| SCREW DIAMETER |
mm (inch) |
| SCREW STROKE |
mm (inch) |
| THEORETICAL SHOT VOLUME |
cm3 (cu.in) |
| SHOT MASS |
g (oz) |
| MAX. INJECTION PRESSURE |
(PSI) |
| MAX. HOLDING PRESSURE |
(PSI) |
| MAX. INJECTION SPEED |
mm/s (inch/s) |
| INJECTION RATE |
cm3/s (cu.in/s) |
| SCREW SPEED |
min-1 |
| PLASTICIZING CAPACITY |
kg/h (oz/s) |
| NOZZLE STROKE |
mm (inch) |
| NOZZLE TOUCH FORCE |
tons |
| AUTO TEMP CONTROL ZONE |
_ |
| HEATING CAPACITY |
kW |
| OTHERS |
MACHINE kVA |
kVA |
| MACHINE MASS |
t (USt) |
| MACHINE SIZE |
L |
m (inch) |
| W |
m (inch) |
| H |
m (inch) |
| HOPPER CAPACITY |
L (gal.) |
|
| MD720S-IV |
| DOUBLE TOGGLE |
| 6370716 |
| (4) |
| 950 x 95037.40 x 37.40) |
| 1390 x 1390(54.72 x 54.72) |
| 1000 (39.37) |
| 400 / 1040 (15.75 x 40.94) |
| 2040 (80.31) |
| 180 (7.09) |
| 196 (22.03) |
| i 55 |
| A |
B |
| 90 (3.53) |
100 (3.94) |
| 450 (17.72) |
| 2863 (174.7) |
3534 (215.66) |
| 2634 (92.91) |
3252 (114.71) |
| 190 (27560) |
155 (22480) |
| 170 (24660) |
140 (20310) |
| 150 (5.91) |
| 954 (58.22) |
1178 (71.89) |
| 130 |
| 309 (3.03) |
327 (3.20) |
| 600 (23.62) |
| 4.5 |
| 1G + 5 |
| 35.65 |
| 190 |
| 38 (41.8) |
| 10.5 (413.3) |
| 2.2 (87.83) |
| 2.4 (92.52) |
| 120 (31.70) |
|
