| ITEM |
UNIT |
| CLAMPING UNIT |
CLAMPING SYSTEM |
_ |
| CLAMPING FORCE |
kN (USt) |
| LOCATION HOLE DIAMETER |
(inch) |
| MACHINE CONFIGURATION |
_ |
| TABLE TYPE |
_ |
| MAX. MOLD OPEN STROKE |
mm (inch) |
| MOLD HEIGHT: min / max |
mm (inch) |
| DAYLIGHT |
mm (inch) |
| EJECTOR STROKE |
mm (inch) |
| MAX. MOLD SIZE |
mm (inch) |
| TABLE DIAMETER |
mm (inch) |
| # OF STATIONS |
_ |
| EJECTOR FORCE |
kN(Ust) |
| INJECTION UNIT |
INJECTION UNIT |
T • m |
| SCREW TYPE |
_ |
| SCREW DIAMETER |
mm (inch) |
| SCREW STROKE |
mm (inch) |
| THEORETICAL SHOT VOLUME |
cm3 (cu.in) |
| SHOT MASS |
g (oz) |
| MAX. INJECTION PRESSURE |
(PSI) |
| MAX. HOLDING PRESSURE |
(PSI) |
| MAX. INJECTION SPEED |
mm/s (inch/s) |
| INJECTION RATE |
cm3/s (cu.in/s) |
| SCREW SPEED |
min-1 |
| PLASTICIZING CAPACITY |
kg/h (oz/s) |
| NOZZLE STROKE |
mm (inch) |
| NOZZLE TOUCH FORCE |
tons |
| AUTO TEMP CONTROL ZONE |
_ |
| HEATING CAPACITY |
kW |
| OTHERS |
MACHINE kVA |
kVA |
| MACHINE MASS |
t (USt) |
| MACHINE SIZE |
L |
m (inch) |
| W |
m (inch) |
| H |
m (inch) |
| HOPPER CAPACITY |
L (gal.) |
|
| MDVR 110 TY |
| DOUBLE TOGGLE |
| 1000 (112.4) |
| 4 |
| THREE TIE BARS |
| OSCILLATING |
| 280 (11.02) |
| 250 / 350 (9.84 / 13.78) |
| 630 (24.80) |
| 75 (2.95) |
| 430 X 430 (16.93 x 16.93) |
| 1340 (52.76) |
| 1 top, 2 bottom |
| 30 (3.37) |
| i 2.7 |
| Y |
A |
B |
| 30 (1.18) |
35 (1.38) |
40 (1.57) |
| 140 (5.51) |
| 99 (6.04) |
135 (8.24) |
176 (10.74) |
| 91 (3.21) |
124 (4.37) |
162 (5.71) |
| 270 (39160) |
200 (29010) |
155 (22480) |
| 245 (35530) |
180 (26110) |
135 (19580) |
| 300 (11.81) |
| 212 (12.94) |
289 (17.64) |
377 (23.01) |
| 400 |
| 48 (0.47) |
67 (0.66) |
98 (0.96) |
| 370 (14.57) |
| 3.26 |
| 1G + 3 |
| 6.95 |
8.15 |
8.15 |
| 34 |
| 6.8 (7.5) |
| 3.81 (150) |
| 1.56 (61.5) |
| 2.07 (81.5) |
| - |
|
