| ITEM |
UNIT |
| CLAMPING UNIT |
| |
CLAMPING SYSTEM |
- |
| CLAMPING FORCE |
kN (USt) |
| MAX. MOLD SIZE |
mm (inch) |
| MOLD OPEN STROKE |
mm (inch) |
| MOLD HEIGHT: min / max |
mm (inch) |
| OPEN DAYLIGHT |
mm (inch) |
| TABLE DIAMETER |
mm (inch) |
| EJECTOR STROKE |
mm (inch) |
| EJECTOR FORCE |
kN(Ust) |
| # OF EJECTOR PINS |
- |
| INJECTION UNIT |
INJECTION UNIT |
T • m |
| SCREW TYPE |
- |
| SCREW DIAMETER |
mm (inch) |
| SCREW STROKE |
mm (inch) |
| THEORETICAL SHOT VOLUME |
cm3 (cu.in) |
| SHOT MASS |
g (oz) |
| Standard Specation |
| MAX. INJECTION PRESSURE |
Mpa (PSI) |
| MAX. HOLDING PRESSURE |
Mpa (PSI) |
| MAX. INJECTION SPEED |
mm/s (inch/s) |
| INJECTION RATE |
cm3/s (in3/s) |
| LP Specation |
| MAX. INJECTION PRESSURE |
Mpa (PSI) |
| MAX. HOLDING PRESSURE |
Mpa (PSI) |
| MAX. INJECTION SPEED |
mm/s (inch/s) |
| INJECTION RATE |
cm3/s (in3/s) |
| SCREW SPEED |
min-1 |
| PLASTICIZING CAPACITY |
kg/h (oz/s) |
| NOZZLE STROKE |
mm (inch) |
| NOZZLE TOUCH FORCE |
kN (Ust) |
| OTHERS |
POWER SUPPLY |
- |
| ELECTRIC CAPACITY |
kVA |
| MACHINE MASS |
t (USt) |
| MACHINE SIZE |
L |
mm (inch) |
| W |
mm (inch) |
| H |
mm (inch) |
| MOLD SURFACE HEIGHT |
mm (inch) |
| NOZZLE TEMP ZONE |
- |
| HOPPER TEMP ZONE |
- |
| HEATING CAPACITY |
kW |
|
| MDVR 110 X |
| Standard |
| DOUBLE TOGGLE |
| 1000 (112.5) |
| 460 x 460 (18.11 x 18.11) |
| 280 (11.02) |
| 250 / 350 (9.84 / 13.78) |
| 630 (24.80) |
| 1340 (52.76) |
| 75 (2.95) |
| 22 (2.47) |
| 1 |
| i 2.2 |
| A |
B |
| 35 (1.38) |
40 (1.57) |
| 115 (4.53) |
| 111 (6.77) |
145 (8.85) |
| 102 (3.60) |
133 (4.68) |
| |
| 200 (29010) |
155 (22480) |
| 180 (26110) |
135 (19580) |
| 260 (10.24) |
| 250 (15.26) |
327 (19.95) |
| |
| 200 (29010) |
155 (22480) |
| 180 (26110) |
135 (19580) |
| 200 (7.87) |
| 192 (11.72) |
251 (15.32) |
| 365 |
| 61 (0.60) |
89 (0.87) |
| 240 (89.44) / Max: 390 (15.35) |
| 15 (1.69) |
| 3 phase AC200V |
| 29 |
| 7.8 (8.57) |
| 2625 (103.35) |
| 1664 (65.51) |
| 3798 (149.53) |
| 1227 (48.3) |
| 1G+ 2 +1G |
| 1 |
| 8.11 |
|
