| ITEM |
UNIT |
| CLAMPING UNIT |
CLAMPING SYSTEM |
_ |
| CLAMPING FORCE |
kN (USt) |
| LOCATION HOLE DIAMETER |
(inch) |
| MACHINE CONFIGURATION |
_ |
| TABLE TYPE |
_ |
| MAX. MOLD OPEN STROKE |
mm (inch) |
| MOLD HEIGHT: min / max |
mm (inch) |
| DAYLIGHT |
mm (inch) |
| EJECTOR STROKE |
mm (inch) |
| MAX. MOLD SIZE |
mm (inch) |
| TABLE DIAMETER |
mm (inch) |
| # OF STATIONS |
_ |
| EJECTOR FORCE |
kN(Ust) |
| INJECTION UNIT |
INJECTION UNIT |
T • m |
| SCREW TYPE |
_ |
| SCREW DIAMETER |
mm (inch) |
| SCREW STROKE |
mm (inch) |
| THEORETICAL SHOT VOLUME |
cm3 (cu.in) |
| SHOT MASS |
g (oz) |
| MAX. INJECTION PRESSURE |
(PSI) |
| MAX. HOLDING PRESSURE |
(PSI) |
| MAX. INJECTION SPEED |
mm/s (inch/s) |
| INJECTION RATE |
cm3/s (cu.in/s) |
| SCREW SPEED |
min-1 |
| PLASTICIZING CAPACITY |
kg/h (oz/s) |
| NOZZLE STROKE |
mm (inch) |
| NOZZLE TOUCH FORCE |
tons |
| AUTO TEMP CONTROL ZONE |
_ |
| HEATING CAPACITY |
kW |
| OTHERS |
MACHINE kVA |
kVA |
| MACHINE MASS |
t (USt) |
| MACHINE SIZE |
L |
m (inch) |
| W |
m (inch) |
| H |
m (inch) |
| HOPPER CAPACITY |
L (gal.) |
|
| MDVR 35 |
| DOUBLE TOGGLE |
| 300 (33.7) |
| 4 |
| THREE TIE BARS |
| OSCILLATING |
| 150 (5.91) |
| 170 / 270 (6.69 / 10.63) |
| 420 (16.54) |
| 60 (2.36) |
| 300 X 300 (11.81 x 11.81) |
| 940 (37) |
| 1 top, 2 bottom |
| 16 (1.80) |
| i 0.7 |
| Y |
A |
B |
| 18 (0.71) |
22 (0.87) |
25 (0.98) |
| 85 (3.35) |
| 22 (1.34) |
32 (1.95) |
42 (2.56) |
| 20 (0.71) |
30 (1.06) |
38 (1.34) |
| 280 (40610) |
200 (29010) |
155 (22480) |
| 270 (39160) |
180 (26110) |
140 (20310) |
| 150 (5.91) |
| 38 (2.32) |
57 (3.48) |
74 (4.52) |
| 240 |
| 6 (0.06) |
12 (0.12) |
18 (0.18) |
| 195 (7.68) |
| 2.02 |
| 1G + 3 |
| 2.99 |
3.50 |
4.19 |
| 15 |
| 3 (3.3) |
| 2.02 (79.53) |
| 1.27 (50) |
| 2.88 (113.4) |
| - |
|
