| ITEM |
UNIT |
| CLAMPING UNIT |
CLAMPING SYSTEM |
_ |
| CLAMPING FORCE |
kN (USt) |
| LOCATION HOLE DIAMETER |
(inch) |
| MACHINE CONFIGURATION |
_ |
| TABLE TYPE |
_ |
| MAX. MOLD OPEN STROKE |
mm (inch) |
| MOLD HEIGHT: min / max |
mm (inch) |
| DAYLIGHT |
mm (inch) |
| EJECTOR STROKE |
mm (inch) |
| MAX. MOLD SIZE |
mm (inch) |
| TABLE DIAMETER |
mm (inch) |
| # OF STATIONS |
_ |
| EJECTOR FORCE |
kN(Ust) |
| INJECTION UNIT |
INJECTION UNIT |
T • m |
| SCREW TYPE |
_ |
| SCREW DIAMETER |
mm (inch) |
| SCREW STROKE |
mm (inch) |
| THEORETICAL SHOT VOLUME |
cm3 (cu.in) |
| SHOT MASS |
g (oz) |
| MAX. INJECTION PRESSURE |
(PSI) |
| MAX. HOLDING PRESSURE |
(PSI) |
| MAX. INJECTION SPEED |
mm/s (inch/s) |
| INJECTION RATE |
cm3/s (cu.in/s) |
| SCREW SPEED |
min-1 |
| PLASTICIZING CAPACITY |
kg/h (oz/s) |
| NOZZLE STROKE |
mm (inch) |
| NOZZLE TOUCH FORCE |
tons |
| AUTO TEMP CONTROL ZONE |
_ |
| HEATING CAPACITY |
kW |
| OTHERS |
MACHINE kVA |
kVA |
| MACHINE MASS |
t (USt) |
| MACHINE SIZE |
L |
m (inch) |
| W |
m (inch) |
| H |
m (inch) |
| HOPPER CAPACITY |
L (gal.) |
|
| MDVR 85 TY |
| DOUBLE TOGGLE |
| 750 (84.3) |
| 4 |
| THREE TIE BARS |
| OSCILLATING |
| 250 (9.84) |
| 220 / 320 (8.66 / 12.6) |
| 570 (22.44) |
| 60 (2.36) |
| 380 X 380 (14.96 x 14.96) |
| 1206 (47.48) |
| 1 top, 2 bottom |
| 21.5 (2.42) |
| i 1.7 |
| Y |
A |
B |
| 25 (0.98) |
30 (1.18) |
35 (1.38) |
| 120 (4.72) |
| 59 (3.60) |
85 (5.19) |
71 (7.02) |
| 54 (1.90) |
78 (2.75) |
106 (3.74) |
| 280 (40610) |
200 (29010) |
150 (21760) |
| 260 (37710) |
180 (26110) |
135 (19580) |
| 300 (11.81) |
| 147 (8.97) |
212 (12.94) |
289 (17.64) |
| 400 |
| 30 (0.29) |
48 (0.47) |
67 (0.66) |
| 340 (13.39) |
| 2.42 |
| 1G + 3 |
| 5.1 |
6.35 |
6.35 |
| 26 |
| 4.9 (5.4) |
| 3.39 (133) |
| 1.45 (57) |
| 1.84 (72) |
| - |
|
